RELEASE PLUS ALKALINE CAR & TRUCK WASH

Chemwatch Independent Material Safety Data Sheet

Issue Date: 29-Jan-2010

C9317TC

CHEMWATCH 5130-81

Version No:3

Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

RELEASE PLUS ALKALINE CAR & TRUCK WASH

PRODUCT USE

Car and Truck washing liquid

SUPPLIER

Company: Benji Distributors Pty Ltd
Address:
17 Grandview Pde
Moolap
VIC, 3221
Australia
Telephone: +61 3 5248 1469
Fax: +61 3 5248 6696

Section 2 - HAZARDS IDENTIFICATION

STATEMENT OF HAZARDOUS NATURE

NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to NOHSC Criteria, and ADG Code.

CHEMWATCH HAZARD RATINGS

Flammability 0
Toxicity 0
Body Contact 0
Reactivity 1
Chronic 2
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4

 

RISK SAFETY
■ Cumulative effects may result following exposure*. ■ Do not breathe gas/fumes/vapour/spray.
■ Limited evidence of a carcinogenic effect*. ■ Avoid contact with skin.
■ Possible respiratory and skin sensitiser*.
* (limited evidence).

 

Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS

NAME CAS RN %
surfactants 10-30

Section 4 - FIRST AID MEASURES

SWALLOWED

· Immediately give a glass of water.
· First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.

EYE

■ If this product comes in contact with eyes:
· Wash out immediately with water.
· If irritation continues, seek medical attention.
· Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.

SKIN

■ If skin contact occurs:
· Immediately remove all contaminated clothing, including footwear.
· Flush skin and hair with running water (and soap if available).
· Seek medical attention in event of irritation.

INHALED

· If fumes or combustion products are inhaled remove from contaminated area.
· Other measures are usually unnecessary.

NOTES TO PHYSICIAN

■ Treat symptomatically.

Section 5 - FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA

· There is no restriction on the type of extinguisher which may be used.
· Use extinguishing media suitable for surrounding area.

FIRE FIGHTING

· Alert Fire Brigade and tell them location and nature of hazard.
· Wear breathing apparatus plus protective gloves for fire only.
· Prevent, by any means available, spillage from entering drains or water courses.
· Use fire fighting procedures suitable for surrounding area.

FIRE/EXPLOSION HAZARD

· Non combustible.
· Not considered a significant fire risk, however containers may burn.
Decomposition may produce toxic fumes of: carbon dioxide (CO2), sulfur oxides (SOx), other pyrolysis products typical of burning organic material.
May emit poisonous fumes.

FIRE INCOMPATIBILITY

· Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may result.

HAZCHEM

None

Personal Protective Equipment

Gas tight chemical resistant suit.
Limit exposure duration to 1 BA set 30 mins.

Section 6 - ACCIDENTAL RELEASE MEASURES

MINOR SPILLS

· Clean up all spills immediately.
· Avoid breathing vapours and contact with skin and eyes.
· Control personal contact by using protective equipment.
· Contain and absorb spill with sand, earth, inert material or vermiculite.

MAJOR SPILLS

■ Moderate hazard.
· Clear area of personnel and move upwind.
· Alert Fire Brigade and tell them location and nature of hazard.
· Wear breathing apparatus plus protective gloves.
· Prevent, by any means available, spillage from entering drains or water course.

 

Personal Protective Equipment advice is contained in Section 8 of the MSDS.

Section 7 - HANDLING AND STORAGE

PROCEDURE FOR HANDLING

· Avoid all personal contact, including inhalation.
· Wear protective clothing when risk of exposure occurs.
· Use in a well-ventilated area.
· Avoid contact with moisture.
· DO NOT allow clothing wet with material to stay in contact with skin.

SUITABLE CONTAINER

· Polyethylene or polypropylene container.
· Packing as recommended by manufacturer.
· Check all containers are clearly labelled and free from leaks.

STORAGE INCOMPATIBILITY

· Avoid reaction with oxidising agents.

STORAGE REQUIREMENTS

· Store in original containers.
· Keep containers securely sealed.
· Store in a cool, dry, well-ventilated area.
· Store away from incompatible materials and foodstuff containers.

Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE CONTROLS

 

 

PERSONAL PROTECTION

EYE

· Safety glasses with side shields.
· Chemical goggles.
· Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lens or
restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use
and an account of injury experience. Medical and first- aid personnel should be trained in their removal and suitable equipment should be readily available. In the
event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lens should be removed at the first signs of eye redness
or irritation - lens should be removed in a clean environment only after workers have washed hands thoroughly. [CDC NIOSH Current Intelligence Bulletin 59].

HANDS/FEET

· Wear chemical protective gloves, eg. PVC.
· Wear safety footwear or safety gumboots, eg. Rubber.
NOTE:
· The material may produce skin sensitisation in predisposed individuals. Care must be taken, when removing gloves and other protective equipment, to avoid all
possible skin contact.
· Contaminated leather items, such as shoes, belts and watch- bands should be removed and destroyed.

OTHER

· Overalls.
· P.V.C. apron.
· Barrier cream.
· Skin cleansing cream.
The local concentration of material, quantity and conditions of use determine the type of personal protective equipment required. For further information consult
site specific CHEMWATCH data (if available), or your Occupational Health and Safety Advisor.

ENGINEERING CONTROLS

■ General exhaust is adequate under normal operating conditions. If risk of overexposure exists, wear SAA approved respirator.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE

Green liquid with a charcateristic odour; mixes with water.

PHYSICAL PROPERTIES

Liquid.
Mixes with water.

 

StateLiquidMolecular WeightNot Available
Melting Range (ºC)Not AvailableViscosityNot Available
Boiling Range (ºC)Not AvailableSolubility in water (g/L)Miscible
Flash Point (ºC)Not ApplicablepH (1% solution)Not Available
Decomposition Temp (ºC)Not AvailablepH (as supplied)6.9-7.3
Autoignition Temp (ºC)Not AvailableVapour Pressure (kPa)Not Available
Upper Explosive Limit (%)Not AvailableSpecific Gravity (water=1)1.02
Lower Explosive Limit (%)Not AvailableRelative Vapour Density (air=1)Not Available
Volatile Component (%vol)Not AvailableEvaporation RateNot Available

 

Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION

CONDITIONS CONTRIBUTING TO INSTABILITY

· Presence of incompatible materials.
· Product is considered stable.
· Hazardous polymerisation will not occur.

For incompatible materials - refer to Section 7 - Handling and Storage.

Section 11 - TOXICOLOGICAL INFORMATION

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS CHRONIC HEALTH EFFECTS
■ Not applicable. ■ Limited evidence of a carcinogenic effect*.
■ Cumulative effects may result following exposure*.
■ Possible respiratory and skin sensitiser*.
■ * (limited evidence).

TOXICITY AND IRRITATION

■ Not available. Refer to individual constituents.

 

 

Section 12 - ECOLOGICAL INFORMATION

No data

 

Section 13 - DISPOSAL CONSIDERATIONS

· Recycle wherever possible.
· Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitable treatment or disposal facility can be identified.
· Dispose of by: burial in a land-fill specifically licenced to accept chemical and / or pharmaceutical wastes or incineration in a licenced apparatus (after admixture with suitable combustible material).
· Decontaminate empty containers. Observe all label safeguards until containers are cleaned and destroyed.
· Containers may still present a chemical hazard/ danger when empty.
· Return to supplier for reuse/ recycling if possible.
Otherwise:
· If container can not be cleaned sufficiently well to ensure that residuals do not remain or if the container cannot be used to store the same product, then puncture containers, to prevent re-use, and bury at an authorised landfill.
· Where possible retain label warnings and MSDS and observe all notices pertaining to the product.

Section 14 - TRANSPORTATION INFORMATION

HAZCHEM:

None (ADG7)
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS: ADG7, UN, IATA, IMDG

Section 15 - REGULATORY INFORMATION

POISONS SCHEDULE None

REGULATIONS

No data for Release Plus Alkaline Car & Truck Wash (CW: 5130-81)

Section 16 - OTHER INFORMATION

CONTACT POINT

Paul Milward-Bason
17 Grandview Parade
Moolap 3221
Victoria Australia

 

■ Classification of the preparation and its individual components has drawn on official and authoritative sources as well as independent review by the Chemwatch Classification committee using available literature references.
A list of reference resources used to assist the committee may be found at:
www.chemwatch.net/references.

 

■ The (M)SDS is a Hazard Communication tool and should be used to assist in the Risk Assessment. Many factors determine whether the reported Hazards are Risks in the workplace or other settings.

 

This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or
criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written
permission from CHEMWATCH. TEL (+61 3) 9572 4700.

 

Issue Date: 29-Jan-2010

Print Date: 15-Nov-2010

 

 

This is the end of the MSDS.